PDA

View Full Version : Starsat Updates Q&a And More!!!



emco83
26th February 2007, 17:33
In This Topic I Will Put New Sw And Answer Your Questions

yan naing
26th February 2007, 19:26
Dear Mr. Emco83 , how about ver 368 for dream tv? And can u plz. tell me how to do to get all channels without changing when we upgrade starsat softwares?I try to edit rom but didn't successful yet.


Thanks.

emco83
27th February 2007, 17:28
dear yan naing,dream is not au,because the starsat corporation does not have any interest for it.the best way is to do backup system then put sw and restore the channels.also in my other topic i put a pc editor.

yan naing
27th February 2007, 17:41
Dear bro.Emco, is it u mean I should back up my system before loading the new software?I also try with pc editor but didn't successful yet and some bug occur in channels when I load with pc editor.ex. Nagra channels will goto FTA and no picture was come out.And I'm very appreciate ur help & teach brother.



Regards.

emco83
27th February 2007, 17:45
yes first you must do system backup and then put the sw.what stb do you have?

emco83
27th February 2007, 17:48
this is latest softcam with bin file updated 26-02-2007.all keys updated
click here http://rapidshare.com/files/13594658/Starsat_Softcam.rar
ENJOY

emco83
27th February 2007, 18:06
the new sw for starsat 1300 1700 1800 super 27/02/2007 tps OK
http://sharebigfile.com/file/94641/SUPERU-version-super-upgrade-rar.html

yan naing
27th February 2007, 18:16
yes first you must do system backup and then put the sw.what stb do you have?


I've dynasat receiver which same with Starsat 550D.


Thanks.

emco83
28th February 2007, 17:34
I've dynasat receiver which same with Starsat 550D.


Thanks.
OK.the procedure is the same.do like that and you wont have any problems.
regards emco83

emco83
28th February 2007, 17:42
new sw for 1200 and 1400
click here http://sharebigfile.com/file/95851/STARSAT-1--SR-X1200D-1400D-V1-82--27-02-2007-zip.html
D+ OK NOW OK & TPS AUTO ON HB TP 10873 & POLSAT OK & TV-CABO OK
& Premiere OK @ SRG OK @ RAI IT OK @ MTV OK & BISS OK @ CW OK AND UPDATES ALL OK
DATE 27 FEB
ENJOY!

emco83
28th February 2007, 17:46
for 550-3500 family new SoftCam keys D+, PREMIERE, ORF, Easy tv, SRG, MTV, FOX TV Serbia 100% OK /
BIN file TPS, MULTIVISION, ABSAT, M6 Music, SPORT+, Canal+, Canal+ Sport,
Canal+ Cinema, Canal+ Decale, Canal+ Hi-Tech 100% OK DATE 27/02/2007
Cabo and all other
http://sharebigfile.com/file/95857/SoftCam-keys-and-tps-bin-Starsat-550-650-3500--28-02-2007-rar.html
enjoy

gopenl
28th February 2007, 18:04
OK.the procedure is the same.do like that and you wont have any problems.
regards emco83

This response is with support to Mr Yan's quirry that whenever we used to load software from the same developer e/g/ starsat, dynasat or any their clone backind up system can be useful but if we use different protocols the system backing up of system is found to be not usable. Please advice in this regard EMCO93. Thanks

yan naing
28th February 2007, 19:29
Yes , it won't work on different protocol that's why Mr.emco adive to use channel editor but as in my experience it doesn't work at all.


Regards.

borj_2004
1st March 2007, 09:00
what about SR-X2100CU, TPS is not working? any comments guys.....

nomzayco
1st March 2007, 09:24
Hi my receiver is srx1500d super but when I check the software it's srx1500d plus and loader version 1.29.0, anyone knows how to upgrade my stb for tps upgrade and needs loaderfor this stb. Thanks my best colleages

yan naing
1st March 2007, 15:42
Hi friend, plz. check here http://www.rdi-board.com/showthread.php?t=43583 this Mr.emco's very useful thread.Hope it can help u.


Regards.

emco83
1st March 2007, 22:26
dear yan naing
Maybe the pc-editor conflicts with a microsoft product, but i am not sure.
I do not have an Idea, what may cause this error, but as a last try:
Try, installing the pc-editor on a fat32 partition or in a flashdrive(with fat32 file system) and running it from there.
You do not have to do all steps , to see the result. Use a saved .img file and go on with the drag procedure.
Also, try to attach here a printscreen of your error... when you get it again
i've had no problem it works perfectly for me
or like this
1. TRY TO INSTALL THE PROGRAM IN SAFE MODE.
2. IF YOU HAVE ANOTHER COMPUTER, TRY TO INSTALL ON IT.
3. WHEN YOU EXTRACT THE PROGRAM, TRY TO ADD PARENTHESIS AFTER THE SETUP.EXE ("SETUP.EXE").
let me know

emco83
1st March 2007, 22:34
new softcam with updates cabo and d+
http://sharebigfile.com/file/97375/SoftCam-D--cabo-1-1--3-07-zip.html
ENJOY

emco83
1st March 2007, 22:39
new sw for 4200 5100 5200
http://sharebigfile.com/file/97379/STARSAT-1--SR-X4000D-4200-5100-5200-zip.html
D+ AUTO UPDATES & TPS AUTO UPDATES & POLSAT TVN TURBO OK & TV-CABO AUTO UPDATES & Premiere OK AUTO @ MTV OK & BISS OK @ CW OK AND UPDATES ALL OK FULL UP KEY

emco83
1st March 2007, 22:47
PC Editor explained!

--------------------------------------------------------------------------------

I have written this as a tutorial for other starsat users:

Many users have report problems with the use of the new pc editor. For me it did not worked too, I was unable to upload the channel list to the program.
Now, main reason for that, is because we have made to many changes to the channel list, like: adding new transponders, rename-move or delete channels manually. So, the PC editor is not able to display this list anymore.

1- Now, first step is: If you want to work with the PcEditor you have to get rid of your old channel list. This can be done in 2 ways, by doing a "reset factory settings" or uploading the software again (I mean V365, V367 or whatever version you use). Remeber your choice because you will do this again in step 6.

Note: If you are happy with your current channel list and favorites, you do not have to go through all of this, just to make use of the PC editor. Before testing myself all the procedure I am explaining, I have done a backup of my channels and settings in the receiver menu, and than a restore after finish testing. *Also, I recommend you to write in a paper all channels you have in favorites 1-4 menu, because you will need them latter.

2- Let me supose you uploaded V365 to the receiver, after that, start PC Editor and do a "Read from STB".
After the process finish, you will see only the transponders in the left pane (because that is all you have in your receiver).
Select a satellite you use, the first for example: 13.0E - Hotbird 1-6(KU) (*Remember this).
Select and DELETE all the transponders it has. Do this for the other satellites you use (delete their transponders).
Now, do a "Save" of this list and give it a name, like: mydata.img . This is the file we will work with.
In the next steps we will upload the latest transponders as well as the channels, to the list.

Note: After doing the above steps you can disconnect the receiver , connect to the TV and do a "restore settings" in the menu to continue as before. I noted this because you may need some time to finish the next steps or you want to start working at them another day, so you do not have to keep the receiver connected to the pc.

3- Now open the IRDtool program, click "Satcodx channel Update" - Internet download. Download the satellites you need or use. After finishing, close the Irdtool program. Go to the directory you have installed(or unzipped) the IRDtool program. Mine is : "C:\Documents and Settings\fotjon\My Documents\f2\sat\August_26,Tools2". You should see a directory called "Import" (...f2\sat\August_26,Tools2\Import). In this directory you can see more than 100 sdx files, one for every satellite. Copy the ones you just updated with the IRDtool in another folder. It is easy to find them, because they have the present date (because you updated them some minutes before).
If you arrange the files in the Import directory by "Date Modified" you will see those sdx files you need, listed before all the others. For easy use, create a new folder and copy them to it.

4- Start PC Editor again and open the file you saved in step 2. Follow this: In the menu select File-Import-SatcoDX , a window will appear, select "File" and click OK.
In the next window, go to the folder you created in step 4, and select one of the sdx files there, for example:
0130.sdx which is the sdx that correspond to Hotbird 13East. The "Import - SatcoDX ..." window that shows the transponders, tv and radio channels for Hotbird, will appear. In the left pane you see the satellite name: 13.0E HOTBIRD 2,6,7A,8. ***SELECT IT*** and ***DRAG IT*** to the left, over the 13.0E - Hotbird 1-6(KU) satellite, in the main PCEditor window. Another window will appear. Select "Transponders" and "Channels" and click Ok. After the procedure finish a new window will pop up, asking "Do you want to apply for import?". Click Yes. Now you can close the "Import - SatcoDX" window.
Repeat step 4, for the other sdx files. Now you have a channel list with all the transponders and channels you need.
(Do a save)

Note: If you find that a transponder you need is not present , you can add it manually. Right-click on any transponder in the main list, click New, put the correct data and click Ok. Than scan it manually when you connect receiver with the TV set. I recommend not to add transponders through the receiver menu (use the pc editor when you have to), and not to move channels through the receiver menu, because this may corrupt the list as before.

5- Now you have to choose the favorite tv and radio channels, (press Ctrl+F). Just take in mind that, if you want a channel to appear before the others, you should put it in the list before the others. If you have written your favorites in a paper as I said in step 1, you can finish fast. Also I remind you that, If you double-click on a channel(in the main list of pceditor) you can change its data and favorite menu from there.

Note: Depending on you geographic position and dish size, you may not get signal for all channels. Even if they appear in the list you will not get them. For example: here in Albania(Tirana) and with my ~85cm dish, I can not get most of the Premiere transponders in Astra 19.2E.
So if you do not like to have some useless transponders and their channels, just delete them in the PCEditor.

6- When you are happy with the way you sorted your favorites, do a save for the last time (File-Save).
Now you can write the data into you receiver. Connect the receiver to the PC. Let us suppose you upload V365 in the receiver as you did in step 1 and 2.

Note: Since this will not only clear all channels but also change other settings to their default, you should adjust this settings according to your own needs, after finishing this last step. For example, I have to configure my DiseqC settings, in order to get signal from the 3 satellites I can get.

Go to the pceditor, open mydata.img (the one you saved last time) and press "Write into STB". (Untill the process finish, do not move around with the mouse or other programs. *Do not interrupt for any reason*)
*If you have to do other changes in future, you can use the time when you have to connect receiver with pc, for updating the tps.bin and softcam. Just connect receiver, do "Read from STB", work with the list, save it and "Write into STB".

Note: In the PCEditor menu, select Custom-CustomMenu. You can put there the KeyEditor, for fast use.
For example, you can fill the fields like this- Name: "Key Editor", Path: "C:\Program Files\KeyEditor\keyeditor.exe" (Browse for the path).
TAKE CARE
REGARDS EMCO83

emco83
1st March 2007, 22:55
AND NOW PAY ATENTION ON THIS LINK YOU CAN SEE THE VIDEO(ALL PROCEDURE FOR PC EDITOR)
http://sharebigfile.com/file/97397/PCEditor-zip.html
FEEL FREE TO ASK SOMETHING

emco83
3rd March 2007, 13:39
new softcam add new key for cyfra+ seca2(cartoon network)
http://sharebigfile.com/file/99028/TPS-1--BiN--AUTO---SOFTCAM-KEY-02-03-2007-zip.html
enjoy

mtiqbal
3rd March 2007, 15:13
I downloaded latest SW from satdw.com. Is this software is TPS auto update?. If yes how to enabled TPS auto?. It is not working with me with 7th Feb 2007 release.

mtiqbal
3rd March 2007, 15:19
Is this encryption is opened by Starsat 120D+ latest SW at satdw.com?.

yan naing
3rd March 2007, 19:03
dear yan naing
Maybe the pc-editor conflicts with a microsoft product, but i am not sure.
I do not have an Idea, what may cause this error, but as a last try:
Try, installing the pc-editor on a fat32 partition or in a flashdrive(with fat32 file system) and running it from there.
You do not have to do all steps , to see the result. Use a saved .img file and go on with the drag procedure.
Also, try to attach here a printscreen of your error... when you get it again
i've had no problem it works perfectly for me
or like this
1. TRY TO INSTALL THE PROGRAM IN SAFE MODE.
2. IF YOU HAVE ANOTHER COMPUTER, TRY TO INSTALL ON IT.
3. WHEN YOU EXTRACT THE PROGRAM, TRY TO ADD PARENTHESIS AFTER THE SETUP.EXE ("SETUP.EXE").
let me know


Thanks alor Sir.I'll try it and tell u my result.


Regards.

yan naing
3rd March 2007, 19:13
Great Explanation about PC Editor and very appreciate job brother.

emco83
4th March 2007, 13:22
to @Aliraza63
yes there is a loader for your model
click here http://sharebigfile.com/file/99648/STB5518-zip.html

emco83
4th March 2007, 13:25
Is this encryption is opened by Starsat 120D+ latest SW at satdw.com?.
NO.this stb cannot open tps at the moment.wait for a new sw

emco83
4th March 2007, 13:31
new sw for the models 250cu 230cu 550cx 150d super 2000cu 2400cu and 3100cucx
satdw.com

emco83
4th March 2007, 13:32
Great Explanation about PC Editor and very appreciate job brother.

your welcome

emco83
4th March 2007, 13:35
TPS 4-5 mart
click here http://sharebigfile.com/file/99652/tps-rar.html
ATENTION:THIS SOFTCAM WORKS FOR THE 550,650,3100,3200,3500 MODELS

kamran
4th March 2007, 18:54
Plz Sir Give Me Starsat150dplus Code Menu

emco83
5th March 2007, 14:15
Plz Sir Give Me Starsat150dplus Code Menu
click here http://sharebigfile.com/file/100576/700-12-89-E127-sgn.html
download this file for your stb

emco83
5th March 2007, 14:18
new softcam http://sharebigfile.com/file/100581/SoftCam-keys-and-tps-bin-Starsat-550-650-3500--03-03-2007-rar.html
ENJOY!

emco83
5th March 2007, 21:27
THE ANSWER FOR pondyguy
sw for 120d plus
http://sharebigfile.com/file/100578/STARSAT-1--SR-X120-130-150-1M-120207-E127-210-12-89-zip.html

asdfgh
6th March 2007, 01:18
dear Mr. emco83,
could you plz give me an auto update for TPS for Starsat sr-x 200ci?
Thank you very much.

emco83
6th March 2007, 17:44
dear Mr. emco83,
could you plz give me an auto update for TPS for Starsat sr-x 200ci?
Thank you very much.

here is the link for your stb http://sharebigfile.com/file/101748/E227-2-00-12-89-sgn.html
Go on a FTA channel & then, go on a channel of 10873 freq and wait for 1 min !!
then back on tps channels !!

emco83
6th March 2007, 17:49
new softcam
TV Cabo ok with key 01
D+ok
ARY Dig B4U dcw ok
click here http://sharebigfile.com/file/101756/SoftCam-ARY-Dig-B4U-dcw-ok-zip.html

emco83
6th March 2007, 17:51
TO ALL USERS STARSAT 220ci
tps is auto from Interstar DSR8005 which is available on the net dated 16th feb.use stbupgrade 1.9.3 (or other version). for using dsr sw clean the starsat sw first by using a boot file.

asdfgh
6th March 2007, 17:52
thank you Mr. emco83.
But unfortionatly, the link is blocked url.
Is there any other links?
And other thing: what is the meaning of FTA channel?

Thank you for your help.

emco83
6th March 2007, 17:53
thank you Mr. emco83.
But unfortionatly, the link is blocked url.
Is there any other links?
And other thing: what is the meaning of FTA channel?

Thank you for your help.

fta channels is free to air channel that is not encrypted
write your e-mail and i will send you the sw

asdfgh
6th March 2007, 17:56
my mail is: [email protected]

Thankyou again

emco83
6th March 2007, 17:58
check your e-mail

asdfgh
6th March 2007, 18:07
check your e-mail

OK Dilevered my friend,
Thank you very much.

But this is for 220 not 200,:bored:
No problem if I download it in 200?

emco83
6th March 2007, 18:10
No I Did A Mistake With Writing.its For 200ci.its Ok To Put This Sw:)

fromdubai
6th March 2007, 18:18
Can I load a softcam file in my sr-x3100cu Super model. Please also let me know the procedure. Currently the software we download from satdw.com does not have any softcam files.

emco83
6th March 2007, 18:22
Can I load a softcam file in my sr-x3100cu Super model. Please also let me know the procedure. Currently the software we download from satdw.com does not have any softcam files.
YES YOU CAN!
if you check all my thread "STARSAT BASIC AND EXPERT METHODS" you will find the answer

emco83
6th March 2007, 18:28
ok here we go again
download the key editor
and here is link for HOW TO UPLOAD SOFTCAM FILE TO STB
http://sharebigfile.com/file/70960/explanation-how-to-upload-softcam-file-to-receiver-doc.html

emco83
6th March 2007, 18:31
AND HERE IS MY LINK FOR STB KEY EDITOR http://sharebigfile.com/file/70946/KeyEditor1-2-20070110--zip.html

pondyguy
6th March 2007, 19:11
thanks for u r efforts mr.emco,

i have connected the stb to the computer and run the emuupgrade and i selected the file which u have sent,
but it is giving the error "model id is not matched",
what is the problem?
can u help me please, mine is sr-x120dplus-2mb version(it is written in the backside)
waiting for u r reply
bye

fromdubai
6th March 2007, 22:24
Can I sort channels in the order I require,using the pceditor software? I tried playing around with the software, it only allows me to create a favourite tv and radio channel list....
pls help :-)

satpal123
6th March 2007, 22:24
How can i get the ******2, Seca2, Cryptworks, CW, DWC & BISS section on my Starsat 3300CU? I press the 0 key for the keycode editor menu but i can only see Viaccess, conax, seca..etc. Do i need 2 upgrade the software?

thanks

asdfgh
7th March 2007, 02:37
No I Did A Mistake With Writing.its For 200ci.its Ok To Put This Sw:)

Thank you very much Mr. emco for your efforts.
I forgot to tell you somthing:
the first thing: My reciever starsat sr-x200ci plus already updated by a S/W, and below are the informations after updating:

Model ID: E224
H/W: 2.00
S/W: 12.90.2

After this, should I download the S/W you have sent it to me?

The second: if yes, could you explain to me how to download it? by which loader?


Finally I know I have tired you,:blush:
So, forgeve me
And thanks a lot

asdfgh
7th March 2007, 04:17
:ooops:Sorry, Another thing:

after downloading S/W and by the way you have told me to do it to open TPS, does tps will open and will not close?or will open for a period of time?

mtiqbal
7th March 2007, 07:56
Dear Emco
There is no encryption "CW" avaialble in Starsat 120D plus. however soem where here I learn that CW keys can work under "BISS"?.
Please let me know is there any possibility to put CW keys in Starsat.
Is software for this model avaialble now with TPS autoupdate?.
Thanks

zafarjoia
7th March 2007, 11:03
What Is Starsat Sr-x200ci Plus Master Password?

Wating For Reply

Thanks

emco83
7th March 2007, 17:04
thanks for u r efforts mr.emco,

i have connected the stb to the computer and run the emuupgrade and i selected the file which u have sent,
but it is giving the error "model id is not matched",
what is the problem?
can u help me please, mine is sr-x120dplus-2mb version(it is written in the backside)
waiting for u r reply
bye
the link that i gave it was for 1m models
for your stb 120d plus 2m click here http://sharebigfile.com/file/102905/STARSAT-1--SR-X120-130-150-2M-120207-E127-700-12-89-zip.html

emco83
7th March 2007, 17:06
Can I sort channels in the order I require,using the pceditor software? I tried playing around with the software, it only allows me to create a favourite tv and radio channel list....
pls help :-)
IN THIS VIDEO WATCH THE ALL PROCEDURE FOR IT
http://sharebigfile.com/file/97397/PCEditor-zip.html

emco83
7th March 2007, 17:09
How can i get the ******2, Seca2, Cryptworks, CW, DWC & BISS section on my Starsat 3300CU? I press the 0 key for the keycode editor menu but i can only see Viaccess, conax, seca..etc. Do i need 2 upgrade the software?

thanks
YES,YOU NEED TO UPGRADE,DOWNLOAD STB KEY EDITOR AND THEN PUT THE SOFTCAM THAT I PUT A LINK IN THIS THREAD DAILY

emco83
7th March 2007, 17:18
:ooops:Sorry, Another thing:

after downloading S/W and by the way you have told me to do it to open TPS, does tps will open and will not close?or will open for a period of time?

ITS NOT SURE ANYMORE BECAUSE TPS ARE KEEP ATACKING THE EMU'S
FIRST YOU MUST CLEAN YOUR ID ON YOUR STB WITH THIS LINK http://sharebigfile.com/file/102921/200-12-89-ID227-sgn.html
AND THEN DOWNLOAD IT THE SW THAT I GAVE YOU

emco83
7th March 2007, 17:22
Dear Emco
There is no encryption "CW" avaialble in Starsat 120D plus. however soem where here I learn that CW keys can work under "BISS"?.
Please let me know is there any possibility to put CW keys in Starsat.
Is software for this model avaialble now with TPS autoupdate?.
Thanks

click here http://sharebigfile.com/file/102905/STARSAT-1--SR-X120-130-150-2M-120207-E127-700-12-89-zip.html
for tps au

emco83
7th March 2007, 17:34
new softcam all Files latest new Keys updated, New Keys Dream TV @ 146°E Agila 2, RAI 13°EAST HOTBIRD, CYFRA+ 13°EAST HOTBIRD, Digital+, TV Cabo, DishNetwork, Bell ExpressVu and so on , all Keys OK !!
click here http://sharebigfile.com/file/102941/Tps-Bin---Sofcam-Starsat-550-650-3500-du-07-03-2007-rar.html
ENJOY:)

asdfgh
7th March 2007, 17:45
ITS NOT SURE ANYMORE BECAUSE TPS ARE KEEP ATACKING THE EMU'S
FIRST YOU MUST CLEAN YOUR ID ON YOUR STB WITH THIS LINK http://sharebigfile.com/file/102921/200-12-89-ID227-sgn.html
AND THEN DOWNLOAD IT THE SW THAT I GAVE YOU

Thank you very much.
But I faced the same problem with the link because its blocked url.
Please, send it to my email: [email protected]

emco83
7th March 2007, 17:49
ooo not again:)
ok check your e-mail now

asdfgh
7th March 2007, 17:58
ooo not again:)
ok check your e-mail now


THANKS A LOT MY FRIEND
DELIVERD 100%
:smile: ;)

emco83
7th March 2007, 19:18
sorry guys i wont be on the forum a couple of days 'cos i have to prepare my exam and play a concert.i play violin and if you wanna see my video,click here http://sharebigfile.com/file/103074/PICT0039-AVI.html
on that video i play a hungarian song called on my language CHUCHULIGA ("COO COO" ON ENGLISH).i've remaked myself and i hope you will like it:)
sorry about the sound quality its recorded from a photo camera
ENJOY IT

skandisk1
9th March 2007, 02:18
StarSat sr-x200ci Plus
model id E224
h/w 2.00
s/w 12.88.7
A Softcam for this model? Pleaseeeeee!!!!
:targa:

pondyguy
9th March 2007, 15:31
thanks mr emco,

i upgraded the software, what is the emulation password, or how can i view or edit the keys for dream

help me
thanks bye

yan naing
9th March 2007, 19:42
Try this one ... Menu ---> Press 1234

mtiqbal
10th March 2007, 07:55
Dear Emco
I am unable to download SW for my starsat120D plus from following link
http://sharebigfile.com/file/102905/...12-89-zip.html
This link is blocked by different ISP here in KSA. Can you please send SW by email. Thanking U in anticipation.
[email protected]
[email protected]
Regards

mtiqbal
10th March 2007, 07:58
Dear Emco.
URL is blocked by our ISp. Please send me SW for Starsat120 D Plus and latest softcam.key. Thanks a lot.
[email protected]
[email protected]

masood
11th March 2007, 05:58
@emco83
I appriciate your help.
Do you have the flash for SR-X4000D,x4200,x5100 or x5200?
any one of these.

emco83
18th March 2007, 18:04
hello guys!NEW UPDATE!
SoftCam keys and tps bin Starsat family 550-650-3500
keys are from 18_03_2007 Digital+,TV Cabo,Multicanal,Premiere,MTV,Orf,Cartoon Network France,TCM France,Extramusic,AB Sat,Srg,Rai,Cartoon Network Europe,TCM Europe,Biss keys updated
click here http://sharebigfile.com/file/114824/Tps-Bin---Sofcam-Starsat-550-650-3500-du-18-03-2007-rar.html
ENJOY:)

emco83
18th March 2007, 18:18
Dear Emco.
URL is blocked by our ISp. Please send me SW for Starsat120 D Plus and latest softcam.key. Thanks a lot.
[email protected]
[email protected]

file sent
check your mail

emco83
19th March 2007, 14:52
TO ALL STARSAT USERS WITH MODELS SRX120-130-150 ok with Auto Update
to @mtiqbal
STEP 1:
make a complete clean.
STEP 2:
Make a half clean (by switching off STB on the rear panel before the end of the process) you will get error message on STB.
STEP 3:
load the 5000FTA.SGN for 1M or 5000FTA2M for 2M and V7.
STEP 4:
your STB is empty so you have to scan the channel.
click here for sw http://sharebigfile.com/file/115609/SRX120-130-150-rar.html
and here for ver clean http://sharebigfile.com/file/115610/sw-ver-clean-rar.html
ENJOY

valiyana
20th March 2007, 11:06
can somebody upload the file in megashare becasue in saudi arabia its not able to download the file from this site its already blocked please help me in this issue

valiyana
20th March 2007, 11:56
Hi emco thanks for the great effort you have done for all startsat members.

Last two months i am looking for a suitable software for my starsat150D receiver its a 1M version. Can you please send me the new software,cleaning software and keys for my receiver.

The URL is blocked here in Saudi Arabia so please send to me

[email protected]

Its really appreciatable for me

gjawhar
20th March 2007, 13:58
I am looking for an FTA model, but afraid how long that model will be supported in software upgrade. which one is the latest & is it true that
some models are easier in AU than others. Thanks a lot

yan naing
20th March 2007, 15:08
I am looking for an FTA model, but afraid how long that model will be supported in software upgrade. which one is the latest & is it true that
some models are easier in AU than others. Thanks a lot


Starsat 550D is the best.

emco83
20th March 2007, 17:23
Hi emco thanks for the great effort you have done for all startsat members.

Last two months i am looking for a suitable software for my starsat150D receiver its a 1M version. Can you please send me the new software,cleaning software and keys for my receiver.

The URL is blocked here in Saudi Arabia so please send to me

[email protected]

Its really appreciatable for me

I'VE SEND YOU E-MAIL

emco83
20th March 2007, 17:32
softcam 20 mart click here
http://sharebigfile.com/file/116549/Tps-Bin---Sofcam-Starsat-550-650-3500-du-20-03-2007-rar.html
Digital+,TV Cabo,Multicanal,Premiere,MTV,Orf,Cartoon Network France,TCM France,Extramusic,AB Sat,Srg,Rai,Cartoon Network Europe,TCM Europe,Biss key
enjoy

zekelmouden
20th March 2007, 19:53
hi emco83
on behalf os starsat members thank you for your help. could you please tell me how to find a solution for my issue:
i have a starsat 4000 I downloaded the latest patch 08/18/2007 from the official site and tps is not working while d+ and tv cabo work.

thank again in advance for any help.

lopop
21st March 2007, 03:59
all bis key for hotbird and astra thank you.

lopop
21st March 2007, 04:02
good night to all

valiyana
21st March 2007, 08:56
Hi emco

thanks for your support to send me the files on my Email Address.

So first I have to use the SW clean software to clean the software of my receiver then i have to install the new software is it right? Which program i have to install in PC to download to my receiver.

What about the keys?

can you help me ?

emco83
21st March 2007, 17:16
Hi emco

thanks for your support to send me the files on my Email Address.

So first I have to use the SW clean software to clean the software of my receiver then i have to install the new software is it right? Which program i have to install in PC to download to my receiver.

What about the keys?

can you help me ?
on satdw.com for your model you have dreamloader.use that program
also click here and check how to use emu

emco83
21st March 2007, 17:30
hi emco83
on behalf os starsat members thank you for your help. could you please tell me how to find a solution for my issue:
i have a starsat 4000 I downloaded the latest patch 08/18/2007 from the official site and tps is not working while d+ and tv cabo work.

thank again in advance for any help.
click here and download the new sw for your stb
http://sharebigfile.com/file/117568/STARSAT-SR-X4000D-4200-5100-5200---ALL-AU---18032007-zip.html

valiyana
21st March 2007, 18:38
Hi Emco I didnt understand what you said.

In SATDW there is one program called EMUUPGRADE and the other is dreamLoader.
So which one i have to use for clean the software of my receiver.
which software i have to use for upgrade
how i can put the keys.from wher i will get the new keys

can you please inform me as soon as possible

Advance thanks for your support

mikhajacovich
22nd March 2007, 05:36
Dear emco83


First off, I must say a BIG "Thank You" because your postings have helped me tremendously in smoothly transforming my Topsat 5000FTA Ultra to Cobra Lince 2500M.

I have also managed to load the following for testing:
Starsat 1300/1700/1800 Super (Minor issues with the remote control compatibility)
Condor 5000C (Needs a remote control)
Topsat 8000 Ultra (No problems)
Topsat/G-Guard 10000 Ultra (Minor issues with the remote control compatibility)
I think Dansat Aces firmware can be loaded as well but I'm happy with Cobra's firmware.

I have a couple of questions if I may:

1- What does "UCA" on the receiver's display mean?
2- I have done all the above in my search for a firmware that would clear D+ & Cabo on 30°W, with no luck so far.
Can you please tell me if the Starsat 1300/1700/1800 Super series clears Hispa channels?

Many thanks in advance

Mikha

valiyana
22nd March 2007, 08:41
Hi EMCO I need urgent help from you

As per the attachment you send to me i do following step
1.I clean the software of my receiver
2.I use emuupgrade to upgrade my receiver unfortunately nothing happend but now i cant see anything only error on my receiver display. The problem I monitord that

My receiver information is
2.10
12.64.4
E124

But you send the software
2.10
12.89
E127

I again download my previous software and now its back to normal thank god
Please send me the correct software for my receiver and also now i am not able to see any keys in my key section and also there is no BISS,Cryptoworks,constand wod also

Please send me the key software also

gjawhar
22nd March 2007, 11:22
Hi Emco

I have purchased the 4200d because I am relying on your help with
every issue I may face.

1- how can i know what update version i have? receiver info menu shows
dates in late 2006, meanwhile TPS are working perfectly, but no D+ & CABO TV.

2- In the catalog, the receiver can updates itself on hotbird by enabling
a menu called satellite update. in my receiver the related tab is not present

3-can downloading softcam key for 4200 can open Hispa channels & biss channels? whre can i find it & which loader to use for softcam?

4-can i upgrade the 4200 options interface & how?


Thanks a lot in advance for your

skandisk1
22nd March 2007, 16:30
StarSat Sr-x200ci Plus
Model id E224
h/w 2.00
s/w 12.90.2
A softcam key from 2007 !!!
Please emco83 !!!
End how do i put the biss key`s whit F?,the reciver see onley B?!?
10X

emco83
22nd March 2007, 16:58
Hi EMCO I need urgent help from you

As per the attachment you send to me i do following step
1.I clean the software of my receiver
2.I use emuupgrade to upgrade my receiver unfortunately nothing happend but now i cant see anything only error on my receiver display. The problem I monitord that

My receiver information is
2.10
12.64.4
E124

But you send the software
2.10
12.89
E127

I again download my previous software and now its back to normal thank god
Please send me the correct software for my receiver and also now i am not able to see any keys in my key section and also there is no BISS,Cryptoworks,constand wod also

Please send me the key software also

first of all did you downloaded the sw from the sharefile that i post here?
this link http://sharebigfile.com/file/115609/SRX120-130-150-rar.html
this is the sw clean file http://sharebigfile.com/file/115610/sw-ver-clean-rar.html
you must know if its 2m or 1m
STEP 3:
load the 5000FTA.SGN for 1M or 5000FTA2M for 2M and V7.
if it doesnt work wait for the next update

emco83
22nd March 2007, 17:12
StarSat Sr-x200ci Plus
Model id E224
h/w 2.00
s/w 12.90.2
A softcam key from 2007 !!!
Please emco83 !!!
End how do i put the biss key`s whit F?,the reciver see onley B?!?
10X

HMM THE LIBYAN TEAM AND RAGGABADER DIDNT HELPED YOU,A?
I GIVE YOU THE LATEST.ITS NOT SO NEW BUT CHECK IT OUT
http://sharebigfile.com/file/118490/StarsaT-120-130-150--200CI-SoftCam-11-1--1-2007-zip.html

emco83
22nd March 2007, 17:17
Hi Emco

I have purchased the 4200d because I am relying on your help with
every issue I may face.

1- how can i know what update version i have? receiver info menu shows
dates in late 2006, meanwhile TPS are working perfectly, but no D+ & CABO TV.

2- In the catalog, the receiver can updates itself on hotbird by enabling
a menu called satellite update. in my receiver the related tab is not present

3-can downloading softcam key for 4200 can open Hispa channels & biss channels? whre can i find it & which loader to use for softcam?

4-can i upgrade the 4200 options interface & how?


Thanks a lot in advance for your

1.YOU DONT NEED THAT.
2.IT CAN BUT NOT WITH NEW UPDATING.JUST FORGET THAT.
3.YES IT CAN OPEN WITH UPGRADING WITH THIS SW.CLICK HERE http://sharebigfile.com/file/117568/STARSAT-SR-X4000D-4200-5100-5200---ALL-AU---18032007-zip.html
4.I DONT KNOW.THIS STB IS VERRY NEW
REGARDS EMCO83

valiyana
22nd March 2007, 17:19
Hi Emco

My receiver is 1M

but you know the model id for my receiver is E124 and your software its showing E127.

You already send the mentioned software through my gmail.

Can you send me the correct software for my receiver.Also can you send me the key bin file because now in my receiver there is no keys in the key section

emco83
22nd March 2007, 17:24
Hi Emco

My receiver is 1M

but you know the model id for my receiver is E124 and your software its showing E127.

You already send the mentioned software through my gmail.

Can you send me the correct software for my receiver.Also can you send me the key bin file because now in my receiver there is no keys in the key section
the procedure
a full clean: you load in your STB the cleaning file with UPGRADE loader like any firm file and you wait the normal finish.

An half clean: you start a full clean but you have to switch off the STB with the on/off button on the rear before the normal finish. Don't let the upgrade finish. may be you will have to do this 2 or 3 times.

emco83
22nd March 2007, 17:26
Just a tip.in case you loaded one software but you dont get signal it means you have wrong hardware version,so make the clean procedure again and install software for another hardware version.

skandisk1
22nd March 2007, 18:24
Sir emco83 the softcam is incomplet but 10q for the link!!:biggrin:
HMM THE LIBYAN TEAM AND RAGGABADER DIDNT HELPED YOU,A?
Im still waiting the answer form they....i don`t know when.... :lookaround:

gjawhar
23rd March 2007, 11:26
1.YOU DONT NEED THAT.
2.IT CAN BUT NOT WITH NEW UPDATING.JUST FORGET THAT.
3.YES IT CAN OPEN WITH UPGRADING WITH THIS SW.CLICK HERE http://sharebigfile.com/file/117568/STARSAT-SR-X4000D-4200-5100-5200---ALL-AU---18032007-zip.html
4.I DONT KNOW.THIS STB IS VERRY NEW
REGARDS EMCO83

Thanks Emco for your friendly help, D+ & CABO are now ok, but the keyeditor 1.2 failed to upgrade the softcam key, the response was "failed to negotiate with stb" . I tried different sof**ey even the old one included with editor, but the result is the same. What was the problem? & what is the link to the right
softcam key for X4200dD (may it be that some keys are not compatible with
my stb?)


maincode 1.3.3 cas data 1.00 defaultdb 1.0.0 mcu version 1.1.2

valiyana
24th March 2007, 16:11
Hi emco

Sorry I am not able to fix my problem.I tried 3 times the software clean and after that when ever i try to load the software you given for 1M its showing the same ERROR.

Becuase my receiver is E124 and the software you given is E127 can you advice me whats the problem

jackliang
25th March 2007, 13:18
Dear emco83,
How use ATMEGA card in Starsat sr-3200?
Thanks,
jack

valiyana
25th March 2007, 14:07
Hi Emco

Yesterday again I tried 3 or 4 Times and its showing that wrong model ID information whenever i am trying to upgrade.Please help me to provide new software for 1M receiver with Model ID E124

yan naing
25th March 2007, 14:43
Dear emco83,
How use ATMEGA card in Starsat sr-3200?
Thanks,
jack


Still we can't use these cards...

emco83
26th March 2007, 14:06
Thanks Emco for your friendly help, D+ & CABO are now ok, but the keyeditor 1.2 failed to upgrade the softcam key, the response was "failed to negotiate with stb" . I tried different sof**ey even the old one included with editor, but the result is the same. What was the problem? & what is the link to the right
softcam key for X4200dD (may it be that some keys are not compatible with
my stb?)


maincode 1.3.3 cas data 1.00 defaultdb 1.0.0 mcu version 1.1.2
4200d cannot work with that the softcam that i post.it is for 550,650...3500 models but not for you stb.the all procedure is to put a new sw.that's all

gjawhar
26th March 2007, 16:09
Thanks agaim Emco & that it also what I undestand with a software upgrade
package. The keys are included with the software bin file.

But How to add a key manually for 4200d . the keyeditor of the stb let me
modify the key but can't find a way to add a new ID (interested in biss channels).

emco83
26th March 2007, 20:42
many stbs has this problem.sorry i cant help you

tjayfox
27th March 2007, 09:43
Please find below the latest firmware update for starsat 4000 & 4200

http://www.moresat.net/021b95985a1066205/021b95985a1075308/index.html

jad_777
28th March 2007, 00:55
Dear emco83
can i use the softcam.key files to update the keys in my reciever starsat
sr-x250cu , and what loader should i use to send it?

gjawhar
28th March 2007, 10:13
yes my friend. I am happy with this update. It opens most TVN channels, CN, Disney, FOX, Rai asia, Rai Africa, Eurosports.

youka21
28th March 2007, 16:25
dear emco can please give a help. i have a starsat sr-x1200D and i don't know to enter Constant CW keys on it. can explain to me how i do it. and thanks in advance

emco83
28th March 2007, 17:16
Dear emco83
can i use the softcam.key files to update the keys in my reciever starsat
sr-x250cu , and what loader should i use to send it?
for now cannot work with softcam.download this sw for your stb http://sharebigfile.com/file/124119/SR-X250CU-V1-79-2007-3-14--rar.html

emco83
28th March 2007, 17:18
new softcam with updates
D+ ok key 01
TV Cabo key 00
MTV network all ok dcw on astra
Max TV ok dcw
RTVi dcw ok
click here http://sharebigfile.com/file/124122/SoftCam-TV-Cabo-MTV-network-dcw--ok-27-3-07-zip.html
ENJOY :) :) :)

jadooghar
29th March 2007, 11:05
Dear Mr. Emco


Star Sat SR-X 4200 D is out of stock in the local market. But the newer version Star Sat 1300 Super is available.
Could somebody advise me which one of the Star Sat receivers better.
Shall I buy the available 1300 Super. Does it have all the features available with 4200 D.

Thanks

emco83
29th March 2007, 13:46
i'm not sure about that.this stb is older,but if you find cheaper 550d super buy it.this stb is still the best.everytime you have update,sw and softcam.
regards emco83

gjawhar
29th March 2007, 15:21
Hi Emco.

Till now 3 software from different locations are used to upgrade 4200;
from satdw, from bigshare (Libyan team) & from moresat.

the latest 2 have newer soft dates. Where to always look for the latest
upgrade? & does the matter open for experts to post an update according
to their own skills, or all of these upgrades have the same origin?

tjayfox
29th March 2007, 17:10
I guess they have the same origin and each one is copying it from one to another, for me I always dolwnload the latest version from moresat, but I'm still searching on the internet for " How to upload keys for starsat 4000 & 4200 without flashing with a new software, but till now I didn't get any result, do you have any idea?

gjawhar
29th March 2007, 17:21
No tjafox. that's what am looking for. Right know it seems the stb cannot even have the ability to add a new key manually, as I would like to test especially biss keys. I think this will be available with next upgrades.

Regarding the 3 soft I mentioned. It is noticed that only the moresat
version is different from other 2 since it opens more channels (may be an upgrade in keys was made only to the original soft)

emco83
29th March 2007, 19:10
some members are editing the sw's and they changed into "new version".for now only moresat has the new updates,but it doesnt mean that always be the first.the libyan team its hard working with it.these days and months you'll be happy with the newest updates but not for a long.that's my opinion.dont mind me.

jad_777
30th March 2007, 08:39
thanks emco83 for your help, hope to post any new files for sr-x250cu when available.

gjawhar
30th March 2007, 10:28
Hi All.

A new soft is available for 4200 on satdw dated 29-3-07. TRY IT & reply to us what new channels is able to open. Seems some nagra2 keys are updated

emco83
1st April 2007, 15:34
NEW SOFTCAM
CABO & D+ & TPS & SRG & RAI IT & CW & BISS & PREMIERE AND ALL KEYS
ADD NEW NEXT NEW KEYS FOR D+ 01
1 april
http://sharebigfile.com/file/128611/STARSAT-KEYS-01-04-2007-rar.html
ENJOY

wah123
1st April 2007, 17:20
hai
from wher i can dowload latest software and loader for neosat sx-2003
thanks

emco83
6th April 2007, 20:43
new softcam
TV Cabo 00 , Premiere,Premiere Int. Kabel Digital, MTV, ORF, Xtramusic, SRG Swiss, RAI, SLO, Kingstone, Mediatech, Sportklub 1&2, DMC new cdw for MTV on 19°E -11739 V-27500 3/4- -VH1- -VH1- -VH1 Classic- -MTV Base- -MTV 2- -MTV Hits- -MTV NL- -MTV IDOL- -MTV Music- -MTV PULSE- -MTV FRANCE- -NICKELODEON France- -GAME ONE- +MTV Trax - Eurobird1-Astra 28.2°East 11895Mhz-Vertical-27500-2/3-AND ALL KEYS
i havent tested
http://sharebigfile.com/file/134860/STARSAT-KEYS-06-1--04-2007-rar.html

emco83
7th April 2007, 17:13
the answer for Jadooghar
you have to clean your flash on your stb.first use id truman from www.tmsatsw.com and then download sw for your model

jadooghar
7th April 2007, 19:17
Dear Emco.

I downloaded ID TRUMAN. The Result is the same Waiting BOOB.

Could you please explain more how to clean flash, where to find the exact program for it. Bear me with. I am a newbie.
Thanks

emco83
7th April 2007, 21:20
Dear Emco.

I downloaded ID TRUMAN. The Result is the same Waiting BOOB.

Could you please explain more how to clean flash, where to find the exact program for it. Bear me with. I am a newbie.
Thanks

id truman is clean flash file
the method is the same.turn off the stb.click on the loader and soon it will have message "waiting for boob".turn on the stb and when you see boob on the display(on the stb),click on the program or press enter

emco83
7th April 2007, 21:35
if it doesnt work check this section for jTAG http://rdi-board.com/showthread.php?t=37325

jadooghar
8th April 2007, 11:06
Dear Emco,

To begin with I am sorry for the uneasiness I cause to you by asking too many silly questions.

I have been using Fortecstar lifetime for the last couple of years. I have been updating whener the newsoftware for this box was available in the net. (Al7bar). Updates for this stopped sometime last year.
I, therefore, decided to buy a new box and asked experts opinion in this forum and in line with the feed back I bought Starsat SR X-500D ultra two weeks ago, since then I am facing a lot of problems in dealing with the new box.


Challenges I face

First I could not scan Insat 2E. I asked info on this and friends including you have answered my question. Still it did not work. The problem, I think, the receiver could not detect signals for reasons I knwon to me. I tried to mannually input frequencies downloaded from Lyngsat. I changed to single LNB and 5150. Somebody suggested to not the frequencies for Insat 2E from Lyngsat and substract 550 and enter the the new freqnecies (-550). I also tried. All in vein.

updating sw
As you know from my previous questions in this forum, and the instructions you kindly suggested, I tried everything but could not upload new software.
If I use simple upload 2M. waiting for BOOB. press ok. no further action.

I also tried key editor. When I click for upload it waits a few seconds and the result "fail STB response.

Then again you have suggested to download ID Truman and were kind enough to provide the portal address. I visited their site. id truman from www.tmsatsw.com. Could not find ID Truman, so I performed a surch within Truman and found ID truman and downloaded. When downloaded the file contains simple 2M and rom.bin file. So I was again in square one. Simple upload waiting BOOB. press OK no further action.

May I ask you one thing I could not understand from your earlier reply. I have to clean my STB's flash and ID Truman is a clean flash file. In fact the file I downloaded does not contain any flash but a copy of sw updater provided by the sat provider or the Libyan team.

Is there any flash cleaner for the 500D Ultra. If yes, where I can find.

The recent reply about Jtag. By now you might know that I am a newbie and does not know even the basics of receiver boxes.

Kindly give me (in details) how could I upgrade sw or refer me to forums givingin tutorials for it.


I thank for you time and patience. My very best regard.

emco83
8th April 2007, 20:32
heloo.first of all my suggestion was to buy 550d super not ultra.
your stb is DEAD.you can only repair with JTAG.on the sticky forum (JTAG)ask for the sheme for your stb and they will answer you
i hope you'll repair it
GOOD LUCK

emco83
8th April 2007, 20:52
softcam for starsat 550-3500 family
http://sharebigfile.com/file/134860/STARSAT-KEYS-06-1--04-2007-rar.html
enjoy
P.S. THIS SOFTCAM WORKS ON DYNASAT F1!

scrombi
9th April 2007, 19:22
Dear Emco.

I downloaded ID TRUMAN. The Result is the same Waiting BOOB.

Could you please explain more how to clean flash, where to find the exact program for it. Bear me with. I am a newbie.
Thanks

My dear jadooghar
Just press waiting boob , it will start uploading, I don't know all users how they download, just press waiting boob too it will start.

geepas123
10th April 2007, 01:28
hi all
I've got starsat sr-x 120 d
H/W 2.10
S/W 12.85
model id E 124
i need the latest software with auto update for this stb.
i searched the web but i found software for model id E127
and not for E124.
i will be thankful if u provide me with latest software for my stb.
thanx.
geepas123

scrombi
10th April 2007, 10:22
hi all
I've got starsat sr-x 120 d
H/W 2.10
S/W 12.85
model id E 124
i need the latest software with auto update for this stb.
i searched the web but i found software for model id E127
and not for E124.
i will be thankful if u provide me with latest software for my stb.
thanx.
geepas123


Go to www.satdw.com , and click on ur model.

linkin
12th April 2007, 09:54
pls help... im using sr-x4000d and having a problem upgrading it. using the files from satdw.com i tried to upgrade it but it tooks too long. i turned off the stb coz i cant wait for it til it finish... it tooks about 24hrs. on my comp screen it says "test serial port status" and on my stb "UPG" sign is flashing. i dont know what the problem is, i dont think its the cable coz im using the right one.

i want to upgrade it coz im getting scrambled channles and theres a EMULATION ERROR at the channel Info. im pointing at Agila 146e using dreamtv code.

can somebody pls help me.. send me the right and necessary files for my stb to work properly... tnx in advance:-D
here's my email ad [email protected] (dont forget the .ph)

yan naing
12th April 2007, 10:21
heloo.first of all my suggestion was to buy 550d super not ultra.
your stb is DEAD.you can only repair with JTAG.on the sticky forum (JTAG)ask for the sheme for your stb and they will answer you
i hope you'll repair it
GOOD LUCK

Yes. u r welcome from our "JTAG Section".Thanks bro.Emco.

emco83
13th April 2007, 19:01
Create your Favorit channels for starsat!
click here http://sharebigfile.com/file/142149/Editor-User-guide-rar.html

emco83
17th April 2007, 22:25
new sw for Starsat SR-X4000D_4200_5100_5200 models
tps is back
click here http://sharebigfile.com/file/145631/SR-X4000D-4200-5100-5200-041707-zip.html

emco83
18th April 2007, 13:43
new softcam!
Slovakia Link ok with new RSA
Digital+ ok key 01
Euskatel ok
Kanal D BiSS
click here http://sharebigfile.com/file/146196/SoftCAM-D--Sky-link-ok-17-4-07-zip.html

gjawhar
18th April 2007, 17:41
Do we have to upload tps.bin with each change of AES keys for tps? How
frequently,it was normally changing before. Noting that both Cabo & D+ are notAU anymore on 4200D, so I have to daily update a key for D+ or cabo.

emco83
19th April 2007, 11:23
yes you have to

emco83
22nd April 2007, 02:43
TOOLS FOR STARSAT AND CLONES LIKE DYNASAT,TRUMAN,BRIGHT,SONYSAT AND OTHERS
tpsbinextract_v2_1
http://sharebigfile.com/file/149325/tpsbinextract-v2-1--1--3-rar.html

emco83
22nd April 2007, 02:43
sm keys tools universal
http://sharebigfile.com/file/149324/SM-Keys-Tools-Universal-W-1--1--Vista-Optimize-rar.html

emco83
22nd April 2007, 02:44
key files converter
http://sharebigfile.com/file/149322/KeysfileConverter-20-rar.html

emco83
22nd April 2007, 02:44
ird tools
http://sharebigfile.com/file/149321/IRDTOOL2M-rar.html

emco83
22nd April 2007, 02:45
key capturator
http://sharebigfile.com/file/149319/Key-Capturator-zip.html

emco83
22nd April 2007, 02:46
key editor
http://sharebigfile.com/file/149318/key-editor106-rar.html

starsat4000D
22nd April 2007, 12:38
hi all,

I have star sat4000D I have bought it begginng of last month ////after 40days TPS france hot bird stopped updating and open for seconds every 11 min /// then I upgrade software from satdw in a shop last week TPS worked just 18 & 19 th of April then stopped again --- please if any one can help me in giving me the procedure for upgradding my stb since i have the serial cable RS232 and the computer

many thanks

Starsat 4000d

emco83
22nd April 2007, 19:27
heloo and welcome.tps is stopped on many stb,except dreambox.so be patient and wait for the new sw

starsat4000D
23rd April 2007, 09:58
heloo and welcome.tps is stopped on many stb,except dreambox.so be patient and wait for the new sw

thank you very much sir, please can you help me in giving me the procedure for upgradding my stb ( starsat4000D) in the future.

jad_777
23rd April 2007, 12:02
I have starsat ag-r5200d, i updated with the latest file from satdw.com which has date 5-10-2006, but it didnt do auto update.is there are any new file or any trick to do.

emco83
23rd April 2007, 12:06
thank you very much sir, please can you help me in giving me the procedure for upgradding my stb ( starsat4000D) in the future.

click here for your stb model.you have the sw,loader and down on the screen GUIDE TO DOWNLOAD

emco83
23rd April 2007, 12:13
new sw for starsat 4000 4200 5100
polsat turbo,tv cabo,d+,premiere,biss channels,cryptoworks...
click here http://sharebigfile.com/file/150491/STARSAT-SR-X4000D-4200-5100-5200---ALL-AU---22042007--zip.html

jad_777
23rd April 2007, 12:33
thanks emco for help.

starsat4000D
23rd April 2007, 12:40
click here for your stb model.you have the sw,loader and down on the screen GUIDE TO DOWNLOAD
many thanks to you emco I will check that in my screen guide

emco83
23rd April 2007, 12:46
Your Welcome,guys:)

koovery
23rd April 2007, 16:14
Your Welcome,guys:)

Still lagging emcooooooooo

gjawhar
23rd April 2007, 17:31
new sw for starsat 4000 4200 5100
polsat turbo,tv cabo,d+,premiere,biss channels,cryptoworks...
click here http://sharebigfile.com/file/150491/STARSAT-SR-X4000D-4200-5100-5200---ALL-AU---22042007--zip.html
Hi Emco.

I always see the description associated with updates to 4200 saying:
"biss channels open" & i cannot see any biss channel open sice many updates
could you explain please? then I found a software to add new keys & save
the modified file,before uploading to stb. Did this works or not? did u tried it
for biss keys & MTV on Astra.
(here ht*p://satrecerver.9.forumer.com/index.php?showtopic=4160&st=0")

emco83
23rd April 2007, 17:44
Hi Emco.

I always see the description associated with updates to 4200 saying:
"biss channels open" & i cannot see any biss channel open sice many updates
could you explain please? then I found a software to add new keys & save
the modified file,before uploading to stb. Did this works or not? did u tried it
for biss keys & MTV on Astra.
(here ht*p://satrecerver.9.forumer.com/index.php?showtopic=4160&st=0")

on some channels you have to wait a longer time.example:on fox tv serbia(hotbird) wait for 30 seconds and it will open.after that when you zap on other channels and return to fox tv the opening would be faster

emco83
23rd April 2007, 17:45
Still lagging emcooooooooo
heloo KOOVERY.long time no chat:)
what happened with you,man?

jad_777
23rd April 2007, 20:57
Dear emco83 , do u have any new file for starsat sr-x250cu AU?

jad_777
23rd April 2007, 21:00
the files for starsat sr-x250cu just posted on satdw.com :)
thanks anyway :)

starsat4000D
25th April 2007, 09:24
heloo and welcome.tps is stopped on many stb,except dreambox.so be patient and wait for the new sw
hi emco83,

thank you very much for your efforts /// today i found that TPS is back again in the new batch for starsat 4000D at www.satdw.com (http://www.satdw.com)
please can you help may in upgrading my reciever software / i have no idea about the steps for this operation

thanks alot

emco83
25th April 2007, 12:52
hi emco83,

thank you very much for your efforts /// today i found that TPS is back again in the new batch for starsat 4000D at www.satdw.com (http://www.satdw.com)
please can you help may in upgrading my reciever software / i have no idea about the steps for this operation

thanks alot

click here http://sharebigfile.com/file/152445/ALIMINIUPG-Vr-1--4-0-rar.html
and download the loader for your stb then download the new sw that i already post it.on the loader you will see place with FILE and on right BROWSE.click on browse and put the sw,click next and wait for upload the all sw.thats all
i hope i helped you

starsat4000D
25th April 2007, 13:42
click here http://sharebigfile.com/file/152445/ALIMINIUPG-Vr-1--4-0-rar.html
and download the loader for your stb then download the new sw that i already post it.on the loader you will see place with FILE and on right BROWSE.click on browse and put the sw,click next and wait for upload the all sw.thats all
i hope i helped you
thank you too much /// Iwill tell you the reults/// priviously I tried but I had not succeed

starsat4000D
25th April 2007, 15:54
thank you too much /// Iwill tell you the reults/// priviously I tried but I had not succeed
thank you very much emco /// the link is not working /// if you can just give me the steps for upgrading

yan naing
25th April 2007, 18:30
thank you very much emco /// the link is not working /// if you can just give me the steps for upgrading


Dear friend, the link is working fine and plz. check again.


Thanks.

emco83
25th April 2007, 19:52
the answer @fenixnew
on this thread check my link for "key editor".download it and put the new softcam for your stb.i will put a link of the new softcam here

emco83
25th April 2007, 19:59
new softcam 25 april THE LYBIAN TEAM DOESNT HAVE.
click here http://sharebigfile.com/file/152593/SoftCAM-MTV-net-ok-25-4-07-zip.html
D+ OK

emco83
25th April 2007, 20:02
NEW CLONES:
Starsat SR X4000D/SR X4200/ SR X5100/SR X5200 =
FTE S 100 /Echolink EL 700 FTA/Echolink EL 700 FTA Plus/Echolink EL 777 FTA
Univers U4111 /Univers U4112 /Univers U4114 /xtream2 /clarke tech 1200 fta


Starsat SR X1200D/1400D = DraGoN X /Smartbox 301 /mediacom

Starsat 120-130-150 PLUS 1M= Condor 5000 FTA

Starsat200 CI = Condor 5000CI / Starcom CI/Omax 850 CI /Omax 2000 CI/
Nextstar YE 2000 CI /Shark Explorer 3000 CI /Premier PRS-106000 /
Hivision HV-5000 CI / Camex 777 CI / Emtech EM-200 / GbSat 2CI /
Jepssen JS-4000 /Signal Planet 999 CI / Fortecstar FSCI 5100 /
Echosat 2110 PLUS / Truman TM-8000 CI / ASTRA 9500 CI


Starsat 1700 = Condor 4500

Starsat SR-X 150/120/130 D Plus = ASTRA 9000 FTA - 8000 FTA
Starcom FTA ) (Omax 1000 FTA / Emtech EM-150/100 / Fortecstar FTA 5000 /
Signal D Box 777 / Nextstar YE 2000 FTA /Atlanta 2900 FTA /
Schaub Lorenz SL-305 / GbSat FTA / Best SR-890 / Echosat 9600 PLUS /
Omax R750 / Truman TM-6600 FTA/ Ttruman TM-130 FTA / Infosat DSR-9000 /
Globalsat GS-150 / Hivision HV-5000 FTA / Hivision HV-3000/3300 FTA

Starsat SR-X190D/SR-X220CI =
GoldeN Inter Star8001 / GoldeN Inter Star8005

borj_2004
26th April 2007, 15:07
NEW CLONES:
Starsat SR X4000D/SR X4200/ SR X5100/SR X5200 =
FTE S 100 /Echolink EL 700 FTA/Echolink EL 700 FTA Plus/Echolink EL 777 FTA
Univers U4111 /Univers U4112 /Univers U4114 /xtream2 /clarke tech 1200 fta


Starsat SR X1200D/1400D = DraGoN X /Smartbox 301 /mediacom

Starsat 120-130-150 PLUS 1M= Condor 5000 FTA

Starsat200 CI = Condor 5000CI / Starcom CI/Omax 850 CI /Omax 2000 CI/
Nextstar YE 2000 CI /Shark Explorer 3000 CI /Premier PRS-106000 /
Hivision HV-5000 CI / Camex 777 CI / Emtech EM-200 / GbSat 2CI /
Jepssen JS-4000 /Signal Planet 999 CI / Fortecstar FSCI 5100 /
Echosat 2110 PLUS / Truman TM-8000 CI / ASTRA 9500 CI


Starsat 1700 = Condor 4500

Starsat SR-X 150/120/130 D Plus = ASTRA 9000 FTA - 8000 FTA
Starcom FTA ) (Omax 1000 FTA / Emtech EM-150/100 / Fortecstar FTA 5000 /
Signal D Box 777 / Nextstar YE 2000 FTA /Atlanta 2900 FTA /
Schaub Lorenz SL-305 / GbSat FTA / Best SR-890 / Echosat 9600 PLUS /
Omax R750 / Truman TM-6600 FTA/ Ttruman TM-130 FTA / Infosat DSR-9000 /
Globalsat GS-150 / Hivision HV-5000 FTA / Hivision HV-3000/3300 FTA

Starsat SR-X190D/SR-X220CI =
GoldeN Inter Star8001 / GoldeN Inter Star8005

Sir EMCO,

What about SR-X2100CU, what are the clones for this receiver?
Thanks in advance......

fenixnew2
27th April 2007, 15:06
Hi Emco 83,

Thank you very much about your help. I appriciate very much your responce. Another question I have is: How can I update TPS? What about auto update? Thanks again.

Warm regards
Robert

yan naing
27th April 2007, 17:41
Hi Emco 83,

Thank you very much about your help. I appriciate very much your responce. Another question I have is: How can I update TPS? What about auto update? Thanks again.

Warm regards
Robert


I think no update software for Starsat receivers....


Thanks.

starsat4000D
28th April 2007, 09:48
Dear friend, the link is working fine and plz. check again.


Thanks.
thank you very much yan

yan naing
28th April 2007, 13:29
thank you very much yan


No problem brother, we'll let u know when update software is release.:D


Regards.

emco83
28th April 2007, 21:49
TPS AUTO FOR 1300 1700 1800 SUPER MODELS
CLICK HERE http://sharebigfile.com/file/155214/SR-X1300-1700-1800-SUPER-ONLY-070426-10-59-zip.html
ENJOY:)

starsat4000D
29th April 2007, 09:25
No problem brother, we'll let u know when update software is release.:D


Regards.
many thanks yan

bushfirewalker
29th April 2007, 16:18
TPS AUTO FOR 1300 1700 1800 SUPER MODELS
CLICK HERE http://sharebigfile.com/file/155214/SR-X1300-1700-1800-SUPER-ONLY-070426-10-59-zip.html
ENJOY:)


sir emco,
i need TP$ so bad, should i get myself a 4200D/4000D or 1300 1700 1800 SUPER MODELS? French Open is around the corner and i dont want to miss a single Federer game. i'm still using the inept 2100CU.

emco83
29th April 2007, 16:37
i suggest you to buy 4000/4200d model these are the models from starsat
but if you dont have problem with the budget buy DREAMBOX 500s its about 200$

bushfirewalker
29th April 2007, 16:57
sir emco,

:whistle: i think the DREAMBOX 500s' $200 price-tag would pose a much bigger problem. :taz:

i'll stick to the 4200D/4000 to replace my klutzy SR-X2100CU for TP$ surfing. the 4200D/4000 does open TP$, does it? :naughty:

emco83
30th April 2007, 13:48
check this link.it should work
http://www.sharebigfile.com/file/156312/STARSAT-SR-X4000D-4200-5100-5200---ALL-AU---25042007-zip.html

emco83
30th April 2007, 14:03
new softcam for 550-350 family
the LIBYAN TEAM DOESNT HAVE THIS SOFTCAM
Digital+ ok key 00
Cabelcom (Swiss Cable) add new
Teleclub (Swiss Cable) add new
NICK/Mtv BiSS ok
Alternativa tv BiSS ok
NBA TV 27.5W BiSS ok
http://sharebigfile.com/file/156326/SoftCam-Digital--ok-29-04-2007-zip.html

emco83
6th May 2007, 17:31
STARSAT 550D SUPER NEW SW
YOU HAVE TO PRESS MENU AND 9999 THAN OK AND RESTART AND ATER THAT YOU DO SYSTEM RESTORE AND WAIT FOR 1 MIN OR 2 ON FRANCE 5 AND TPS OPENS 100%.
click here http://sharebigfile.com/file/161826/20070505-STARSAT-SR-X550D-V411-The-First-SUPER-rar.html

emco83
6th May 2007, 17:32
new softcam
ADD NEW KEYS FOR D+ 00 & CABO 01 & SRG & Biss key for Romania feed channel Turksat 2A - 42.0°
click here http://sharebigfile.com/file/161829/STARSAT-KEYS-06-05-2007-rar.html

emco83
6th May 2007, 17:40
new sw Tps Auto Starsat 120-130-150-200 - 02.05.2007
click here http://sharebigfile.com/file/161834/10-89-SW-FOR-STARSAT--BY-LiBYAN-TEAM-RaR.html

emco83
11th May 2007, 17:02
softcam for starsat
D+ ok
http://sharebigfile.com/file/166230/SoftCam-Digital---ok-10-5-07-zip.html

masood
11th May 2007, 17:07
@emco83
do you have flash file of sr x4000D or 4200D?

fenixnew2
14th May 2007, 14:57
Dear Mr. Emco,
Thank you very much for your help here in forum. Can you tell me about the new softcam for Starsat srx 3500 cuci ultra? What about tps auto? 371 version is not valid at www.satdw.com (http://www.satdw.com). Hope to hear from you.
Best wishes

emco83
14th May 2007, 21:01
Dear Mr. Emco,
Thank you very much for your help here in forum. Can you tell me about the new softcam for Starsat srx 3500 cuci ultra? What about tps auto? 371 version is not valid at www.satdw.com (http://www.satdw.com). Hope to hear from you.
Best wishes

try with this sw v411
click here http://sharebigfile.com/file/168835/20070503-STARSAT-SR-X3500CUCI-V411-The-First-SUPER-zip.html

gilles_lebo
15th May 2007, 12:01
Hi all,

i use axil new clone for my sr-x1700D, ive d+, cabo, 1er, tsr and so on.

i search a method to add the sexvie keys on the VIA2, or Biss section.

some one known the good provider and the good index for SV.

thanks

dampylli
15th May 2007, 18:45
I have STARSAT X220CI but it doesn't have key box to input DCW keys what should i do please. I downloaded the one before last version of software in satdw but no DCW box. Thanks

fenixnew2
16th May 2007, 14:21
Dear Mr. Emco,
thank you very much about your help and your responce. I downloaded your file but it was not working properly. TPS were not auto and premier was not opened. Please can you help me further? Thank you again.
Best wishes

emco83
16th May 2007, 17:48
Dear Mr. Emco,
thank you very much about your help and your responce. I downloaded your file but it was not working properly. TPS were not auto and premier was not opened. Please can you help me further? Thank you again.
Best wishes

just download the new softcam and put it with the program KEY EDITOR(search it on this thread)
i'll put the new softcam

emco83
16th May 2007, 18:01
softcam from 15 may
click here http://sharebigfile.com/file/170196/softcam-15-05-2007-rar.html

emco83
16th May 2007, 18:26
Atention
Premiere Is Down
Waiting For Updates!

fenixnew2
25th May 2007, 14:16
Thanks a lot Mr. Emco. Can you tell me why premiere is not working properly? Arena Home and Heimatkanal is not openning. Greetings.

emco83
25th May 2007, 19:57
Thanks a lot Mr. Emco. Can you tell me why premiere is not working properly? Arena Home and Heimatkanal is not openning. Greetings.

they've made nano attack,but on lot of models now premiere works.
still nothing for 550,650..3500 models

satpal123
9th August 2007, 00:46
Hi there, IS there a way i can enter I r d e t o 2 keys in2 my Starsat 3300CU reciever? coz i can c the viacess, nagra etc but I2 is not there?

euthanasia
14th October 2007, 13:40
dear all, my regions pakistan, karachi.

can some one guide me on the upgrade of 550d super, the SW version i use is 369. the ver 371 was unstable any test reports on teh ver 377? and would it help on the scrambled channels on IntelSat7-10 and AsiaSat3s. (b4u and some others are already there) i need assistance on bbc, discovery and netgeo and cartoon net.

regards,

dodi
14th October 2007, 14:42
dear all, my regions pakistan, karachi.

can some one guide me on the upgrade of 550d super, the SW version i use is 369. the ver 371 was unstable any test reports on teh ver 377? and would it help on the scrambled channels on IntelSat7-10 and AsiaSat3s. (b4u and some others are already there) i need assistance on bbc, discovery and netgeo and cartoon net.

regards,

your answar is alrady given

ice 0n fire
22nd March 2008, 11:44
hi all

anyone have a new software for Starsat 200ci with ID E224

for TPS

thx

yan naing
22nd March 2008, 13:16
hi all

anyone have a new software for Starsat 200ci with ID E224

for TPS

thx

Did u check on www.satdw.com ?

scrombi
23rd March 2008, 11:34
dear all, my regions pakistan, karachi.

can some one guide me on the upgrade of 550d super, the SW version i use is 369. the ver 371 was unstable any test reports on teh ver 377? and would it help on the scrambled channels on IntelSat7-10 and AsiaSat3s. (b4u and some others are already there) i need assistance on bbc, discovery and netgeo and cartoon net.

regards,

For discoveryand cartoon network u should have 8 feet dish for hotbird satellite , where u may get all these channels with latest software on www.satdw.com whcih is 5-2-2008 dated, ok

willgd
26th May 2008, 14:01
Hi guys,

I downloaded the latest s/w, port connection is fine but transfer data failed each time...
Any idea why ?

Thx

willgd
10th June 2008, 21:19
Hi guys,

Any luck abt this one ?

abualhajo
23rd July 2008, 21:30
Hi iam looking for any firmware for Starsat SR-120D Plus.Please help....

darkangel1
6th September 2008, 15:45
Hi,

I have a starsat 3500 cuci super and I have patched it with 20070311_SR-X3500CUCI_V369_super for the first time.

The problem is that I can not watch Premiere or the ORF channels on Astra. Is there something else I have to do after the patching so I can watch Premiere.

I hope someone can help me. Thank you in Advance.

udaasc
6th September 2008, 20:46
Hi,

I have a starsat 3500 cuci super and I have patched it with 20070311_SR-X3500CUCI_V369_super for the first time.

The problem is that I can not watch Premiere or the ORF channels on Astra. Is there something else I have to do after the patching so I can watch Premiere.

I hope someone can help me. Thank you in Advance.
http://www.satdw.com/menu.asp

darkangel1
8th September 2008, 18:14
Sorry udaasc, but I do not undersand what you mean by your link.
I have already installed the patch as I mentioned before, but Premiere still does not work.

darkangel1
12th September 2008, 17:07
Do I have to activate decryption somehow?

mujahid
26th May 2009, 16:30
i would like to update my starsat reiver .. i will be thanks if i get help